Settings

Interface Settings

Interface Settings

  1. Middle C: Define C3, C4 or C5 as middle C. Default: C4

  2. Activate Continuous Sustain Pedal: Activate/deactivate continuous sustain pedal (CC 64). Only effective when the corresponding hardware is available. Default: OFF.

Engine Settings

Engine Settings

  1. Default Preload: Reduce RAM footprint and loading time with lower settings. Default: 16,384 samples.

  2. Streaming Threads: Streaming threads define the number of simultaneous reads from the drive during playback. The default value (4) is appropriate in most cases.

  3. Loading Threads: Loading threads define the number of simultaneous reads from the drive during loading into RAM. The default value (4) is appropriate in most cases.

  4. Pan Law: Determines how the signal level in the slot rack mixer is affected by panning. The optimum value depends on the input source. Default: -3 dB

  5. Unload Samples with Mixer Channels: When activated, all samples loaded with a specific channel will be unloaded when the mixer channel is disabled.

Database Settings

Database Settings

  1. User Preset Folder: Shows the current location of your User Preset folder. Another location can be assigned with the button to the right. RED path indicates a wrong or missing storage location.

Default Location, Windows: C:\Documents and Settings\All Users\Documents

Default Location, macOS: /Users/Shared

  1. Preset Folder Assignment Button: Assign any location to store and manage your user presets. RED path indicates a wrong or missing path.

  2. Volumes Scan Paths: Manage your sample content. Multiple locations possible.

  3. Path: Shows the location of your assigned sample content. RED paths indicate a wrong or missing path.

  4. Preload Size: Reduce the RAM footprint and loading time for specific paths.

  5. Content Path Display: Displays the path where your sample content is stored. Add/remove paths with the +/buttons below.

  6. Add Path: Add a new sample content path. Changes require a restart of your DAW.

  7. Remove Path: Remove the selected sample content path(s). Changes require a restart of your DAW.